DIY Tutorial: How to Make Your Own Tube Pillow Cases
Tube pillow cases are a popular DIY project for many reasons. They are a simple and affordable way to update the look of your pillows and add a personal touch to your home decor. Tube pillow cases are also a great way to use up fabric scraps or repurpose old fabric, making them an eco-friendly option. Whether you are a beginner or an experienced sewer, making your own tube pillow cases can be a fun and rewarding project.
Key Takeaways
- Tube pillow cases are a simple and easy DIY project for beginners.
- Materials needed include fabric, thread, scissors, and a sewing machine.
- Measuring and cutting the fabric accurately is crucial for a well-fitted pillow case.
- Sewing the fabric together and hemming the edges are the main steps in creating the pillow case.
- Adding a closure, turning the pillow case right side out, and ironing are the final steps for a finished product.
Materials Needed for DIY Tube Pillow Cases
To make your own tube pillow cases, you will need the following materials:
– Fabric: Choose a fabric that is soft and durable, such as cotton or linen. You will need enough fabric to cover the length and width of your pillow, plus extra for seam allowances.
– Thread: Use a thread that matches the color of your fabric.
– Sewing machine: A sewing machine will make the process much faster and easier, but you can also sew the pillow case by hand if you prefer.
– Scissors: Sharp scissors are essential for cutting the fabric accurately.
– Pins: Pins will help hold the fabric in place while you sew.
– Measuring tape or ruler: Use a measuring tape or ruler to measure the dimensions of your pillow and cut the fabric to size.
You can purchase these materials at your local fabric store or online. Look for sales or discounts to save money on your supplies.
Measuring and Cutting the Fabric
Before you start sewing, you will need to measure and cut the fabric for your pillow case. Start by measuring the length and width of your pillow. Add an inch to each measurement to account for seam allowances.
Lay your fabric flat on a clean surface and use a measuring tape or ruler to mark the dimensions of your pillow on the fabric. Use sharp scissors to cut along the marked lines. It is important to cut the fabric accurately to ensure that the pillow case fits your pillow properly.
To make sure your cuts are straight, you can use a ruler or straight edge as a guide. Place the ruler along the marked line and use it as a guide for your scissors. Take your time and cut slowly to ensure accuracy.
Sewing the Fabric Together
| Metrics | Values |
|---|---|
| Number of stitches per inch | 10 |
| Time taken to sew a single piece | 5 minutes |
| Number of pieces sewn per hour | 12 |
| Thread consumption per piece | 2 meters |
| Number of sewing machines used | 4 |
Once you have cut the fabric to size, it is time to sew the fabric together to create the pillow case. Start by folding the fabric in half, right sides together, so that the shorter edges are aligned. Pin the edges together to hold them in place.
Using a sewing machine or needle and thread, sew along the pinned edge, leaving a 1/2 inch seam allowance. Backstitch at the beginning and end of your seam to secure it. If you are using a sewing machine, use a straight stitch and sew slowly to ensure accuracy.
After sewing the first seam, open up the fabric and fold it in half again, this time with the right sides facing out. Pin the edges together and sew along the pinned edge, again leaving a 1/2 inch seam allowance.
Hemming the Edges of the Pillow Case
To give your pillow case a clean and professional finish, you will need to hem the edges. Start by folding over one of the long edges of the fabric by 1/4 inch and press it with an iron. Then fold it over again by another 1/4 inch and press it again. Pin the folded edge in place.
Using a sewing machine or needle and thread, sew along the pinned edge to secure the hem. Backstitch at the beginning and end of your seam to secure it. Repeat this process for the other long edge of the fabric.
Adding a Closure to the Pillow Case
There are several options for adding a closure to your pillow case, such as zippers, buttons, or snaps. Choose a closure that is easy to use and complements the style of your pillow case.
If you are adding a zipper, start by measuring the length of the opening on your pillow case. Cut a piece of zipper that is slightly longer than the opening. Pin the zipper in place along one of the short edges of the fabric, right sides together. Sew along the pinned edge, making sure to sew close to the teeth of the zipper.
If you are adding buttons or snaps, mark the placement of the closures on the fabric. Sew the buttons or attach the snaps according to the manufacturer’s instructions.
Turning the Pillow Case Right Side Out
After adding the closure, it is time to turn the pillow case right side out. Carefully reach inside the pillow case and grab one of the corners. Pull it through the opening and continue to pull until the entire pillow case is right side out.
Use your fingers or a blunt object, such as a knitting needle, to push out the corners and smooth out any wrinkles or creases.
Ironing and Pressing the Pillow Case
To give your pillow case a polished look, it is important to iron and press it. Start by ironing the fabric on a low heat setting to remove any wrinkles. Be careful not to use too much heat, as this can damage certain fabrics.
After ironing, use a pressing cloth or a piece of scrap fabric to protect your pillow case from direct heat. Press along the seams and edges to create crisp lines and a professional finish.
Tips and Tricks for Making Perfect Tube Pillow Cases
– Measure twice, cut once: Double-check your measurements before cutting the fabric to ensure accuracy.
– Use sharp scissors: Dull scissors can make it difficult to cut fabric accurately. Invest in a good pair of fabric scissors for best results.
– Pin generously: Use plenty of pins to hold the fabric in place while you sew. This will help prevent shifting and ensure straight seams.
– Take your time: Sewing can be a relaxing and enjoyable activity, so take your time and enjoy the process. Rushing can lead to mistakes and uneven seams.
– Practice makes perfect: If you are new to sewing, don’t be discouraged if your first few pillow cases don’t turn out perfectly. With practice, your skills will improve.
Conclusion and Final Thoughts on DIY Pillow Case Making
Making your own tube pillow cases is a fun and rewarding DIY project that allows you to personalize your home decor. With just a few materials and some basic sewing skills, you can create beautiful pillow cases that add style and comfort to any room.
Remember to measure and cut the fabric accurately, sew the fabric together with straight seams, hem the edges for a clean finish, and add a closure that suits your style. Don’t forget to turn the pillow case right side out, iron and press it for a polished look, and use these tips and tricks to make perfect pillow cases every time.
So why not give it a try? Grab some fabric, thread, and a sewing machine, and start making your own tube pillow cases today. You’ll be amazed at how easy and enjoyable it is to create something beautiful with your own two hands.
If you’re looking for a fun and creative way to update your bedding, why not try making your own tube pillow cases? This DIY project is a great way to add a personal touch to your bedroom decor. To get started, check out this helpful article on Bedding Help that provides step-by-step instructions on how to make tube pillow cases. With clear and easy-to-follow directions, you’ll be able to create custom pillow cases that perfectly match your style and taste. So why wait? Click here to learn more: https://beddinghelp.com/how-do-you-put-a-fitted-sheet-over-a-mattress-topper/
FAQs
What is a tube pillow case?
A tube pillow case is a type of pillowcase that is made by sewing together two pieces of fabric in a cylindrical shape, with one end open and the other end closed.
What materials do I need to make a tube pillow case?
To make a tube pillow case, you will need two pieces of fabric, a sewing machine, thread, scissors, and pins.
What size should the fabric be for a tube pillow case?
The size of the fabric for a tube pillow case will depend on the size of your pillow. Measure the length and circumference of your pillow and add an inch to each measurement for seam allowance.
What type of fabric is best for a tube pillow case?
Cotton or cotton blend fabrics are best for making tube pillow cases as they are soft, durable, and easy to work with.
What is the process for making a tube pillow case?
The process for making a tube pillow case involves cutting two pieces of fabric to size, sewing them together along the long edge, and then sewing the short edges together to create a tube shape. Finally, turn the pillowcase right side out and insert your pillow.
Can I customize my tube pillow case?
Yes, you can customize your tube pillow case by adding embellishments such as lace, buttons, or embroidery. You can also choose different fabrics to match your decor.
